STOVES 600GR, Руководство пользователя и инструкция по установке

Страница: 26 / 34

24
INSTALLATION INSTRUCTIONS
Step 3: Connect to the gas supply
1. The inlet to the appliance is pipe
thread ISO RP
1
⁄
2
” internal situated
at the rear top right corner.
2. Fit the bayonet connection to the
wall in the shaded area as shown.
3. Fit the strainer (supplied with the
appliance) to the flexible hose inlet
as shown, making sure that it is
pushed fully into place.
4. Use a 900mm - 1125mm length of
flexible connector and make sure it
does not block the fan inlet and
cannot come into contact with
moving parts of the cabinetry - eg;
drawers and doors.
5. Natural Gas - Flexible connections
should be to BS 669. Parts of the
appliance likely to come into contact
with a flexible connecter have a
temperature rise less than 70˚C.
6. Make sure all connections are gas
sound.
Important: - ensure that you route all
mains and electrical cables and
flexible tubing well clear of any
adjacent heat source, such as an oven
grill or hob.
Ensure that all pipe work is of the
correct rating for both size and
temperature.
Rear
Wall
60 mm
100
mm
150 mm
square