STOVES 1000GDL, Руководство пользователя и инструкция по установке

Страница: 14 / 14

12
Minute Minder (if fitted)
Initial display
The digital timer enables you to set the
time of day (24 hour clock) and the
minute minder alarm.
Setting the “Time of Day”
1. Switch on the electricity supply to
the appliance.
The display will flash.
2. Press and release the time of day
button.
3. Set the time of day with the plus
and minus buttons.
4. The time will be set 7 seconds after
the last plus or minus operation.
Alarm tones
After setting the time of day, you can
select one of three alarm tones.
Press the
minus button to listen to the
first tone, then release the minus button
and press it again to listen to the
second tone, etc.
Releasing the
minus button after a tone
has sounded will automatically select
that tone.
Setting the minute minder
1. Press and release the plus button
to change the display from clock
to minute minder - the bell symbol
will light.
2. Use the plus and minus buttons to
set the length of time before the
alarm tone will sound. The display
will increase / decrease in units of
10 seconds up to 99 minutes 50
seconds, and in units of 1 minute
from 1 hour 40 minutes upwards.
The maximum period which may
be set is 10 hours.
The display format will change
after 99 minutes and 50 seconds
to 1 hour and 40 minutes.
During countdown, the minute
minder has priority on the display,
which will show (in
minutes :
seconds , or hours : minutes ) the
time remaining.
When countdown is complete, the
tone will sound for 7 minutes, or it
can be reset with one touch of
any button.
To cancel the minute minder at
any other time, run down the set time
with the
minus button.
The display will revert to show the
time of day.
Time of day
button
Minus
button
Plus
button
Caution: Any cleaning agent
used incorrectly may damage
the appliance.
Always let the cooker cool
before cleaning.
Some cooking operations generate
considerable amount of grease, this
combined with spillage can become a
hazard if allowed to accumulate on
the appliance through lack of
cleaning. In extreme cases this may
amount to misuse of the appliance and
could invalidate your guarantee.
It is recommended that the appliance
is cleaned after open roasting
Do not use caustic, corrosive or
abrasive cleaning products, products
containing bleach, coarse wire wool
or any hard implements, as they will
damage the surfaces.
All parts of the cooker can be safely
cleaned with a cloth wrung out in hot
soapy water.
Painted, plastic & metal finish
parts
(where fitted)
PAINTED FACIA
&
METAL DOOR PANELS
(if
fitted),
SIDE PANELS
,
HANDLES
&
CONTROL
KNOBS
Only use a clean cloth wrung out in
hot soapy water.
Burner caps and heads
Important:
Allow burners to cool
before cleaning.
Caution: Hotplate burners can be
damaged by soaking, automatic
dishwashers (or dishwasher powders
/ liquids), caustic pastes, hard
implements, coarse wire wool, and
abrasive cleaning pastes.
For the burners to work safely, the slots
in the burner head where the flames
burn need to be kept clear of deposit.
Clean with a nylon brush, rinse, and
dry thoroughly.
Hotplate burners may be cleaned with
a moist soapy pad, eg; “Brillo”.
Important: The burner caps and
heads must be repositioned correctly
so that they sit squarely onto the hob
as shown below.
13
Cleaning
incorrect
burner cap not central
incorrect
angled
correct
parallel
burner cap
burner head