Certain extracts may be provided in
a diluted form as alcoholic solutions.
The advantage of such extracts is that
the liquid is distributed more evenly
around the stainless steel wire of the
Liquid Pad. Therefore, the surface
used for vaporization is larger. How-
ever, if such extracts are used, first
the alcohol must be separated from
the extract as alcohol should not be in-
haled. To do this, put the Filling Cham-
ber onto the unheated (room tempera-
ture)
VOLCANO
and switch on the
air pump until the alcohol has evapo-
rated, which may take a few seconds.
As alcohol has a characteristic odor, a
simple smell test can be performed to
find out whether the Filling Chamber
is free of alcohol. The extracts that
vaporize only at higher temperatures
12. LIQUID PAD
The devices comply with the following
EC Directives:
³
³
Low Voltage Directive 73/23/EWG
³
³
Electromagnetic Compatibility
89/336/EWG
13. CE DECLARATION OF CONFORMIT Y
remain in the Liquid Pad. Then heat
up the
VOLCANO
and vaporize the
extract left on the Liquid Pad as de-
scribed in the chapters
EASY VALVE
and
SOLID VALVE
, pages 21 and
32. Extracts without solvents can
be vaporized directly after they are
applied to the Liquid Pad.
12.3.Cleaning
Put the Liquid Pad in rubbing alcohol
and rinse it thoroughly. As the Liq-
uid Pad is made of stainless steel, it
can be used again and again if it is
cleaned well.
Manufacturer’s Representations
and Warranties
These representations and warranties
are applicable to all end-customers
(the “Customers” and each, individu-
ally, a “Customer”) purchasing prod-
ucts (the “Products”) sold by Storz
& Bickel GmbH & Co. KG or Storz &
Bickel America, Inc. (the “Company”).
Warranty and Limitations
Company warrants solely to the origi-
nal purchaser of the Products that
for the warranty period (as defined
below), the Products will be free from
defects in materials and workmanship
under normal use, and will conform to
Company’s published specifications
of the Products. Notwithstanding the
foregoing, Company retains its right
to deviate from its published specifi-
cations due to the latest innovations
and improvements in function and
design of the Products. The forego-
ing warranty is subject to the proper
storage, transportation and use of
the Products, and does not include
defects due to normal wear and tear
or deterioration, including, but not lim-
ited to, defects in Screens, Air Filters,
Balloon Material, Valve Balloons and
similar parts subject to wear and tear.
Upon delivery, Customer shall imme-
diately inspect the Products for con-
formity and visible defects. Customer
shall give Company immediate writ-
ten notice of any non-conformities or
visible defects regarding the Products
and contact Company in writing con-
cerning return or repair, as the case
may be.
Warranty
Customer shall notify Company in
writing of any defects of the Products.
Company’s sole obligation under the
foregoing warranty is, at Company’s
option, to repair or correct any such
covered defect or to replace or ex-
change the Product, provided Cus-
tomer has returned the Products with
a copy of the original invoice to the
Company or one of its authorized repair
shops at his own cost. Any repaired,
corrected, replaced or exchanged
Product shall be subject to the war-
ranty set forth in section “Warranty
and limitations”, following their repair,
correction, replacement or exchange.
If Company has received notification
from Customer, and no defects of the
Product could be discovered, Cus-
tomer shall bear the costs that Com-
pany incurred as a result of the notice.
The warranty period begins on the
date when the Products are physically
delivered to the Customer’s site, and
is valid for thirty six (36) months for
VOLCANO DIGIT
and
VOLCANO
CLASSIC
.
Company does not authorize any per-
son or party to assume or create for it
any other obligation or liability in con-
nection with the Products except as
set forth herein.
14. WARRANT Y, LIABILIT Y, REPAIR SERVICE
44
45
