Storno CQM6113, Руководство пользователя, Страница: 5 / 14

Control box keys from left to right and up
and their functions:
On/Off On/off key for the transceiver.
Press for three seconds for a total reset of the software. Then turn set on again.
Speaker On/off key for the audio amplifier
Volume down In usual mode to decrease the audio. With ‘beep’. With designated minimum level.
In scan mode to go down by the channels or the frequency.
In the Selective Call mode to navigate between the messages.
Volume up In usual mode increase the audio. With ‘beep’.
In hand-scan mode to go up by the channels or the frequency.
In the Selective Call mode to navigate between the messages.
CH then Volume down
To set the 1
st
channel of the channel scan (first set channel with CH !). See scanning.
CH then Volume up
To set last channel of the channel scan (first set channel with CH !). See scanning.
Mode selector then Volume down
To set low transmitting power. With display indication.
Mode selector then Volume up
To set nominal (full) transmitting power. With display indication.
S Entering/ending the ‘ scan sub-mode’ . The scan indicator will light up.
Scan sub-mode allows to scan the channels or the frequency by hand or in automatic
mode.
To scan by hand press Volume up/Volume down for scan up/down the channels or the
frequencies.
To automatic scan press A to start/stop scan (scan indicator will start flashing).
CH After entering 2 figures for the channel number the set will switch to that channel.
CH
then Volume down
To set the start channel for the channel scan. First select a channel with CH .
CH then Volume up
To set the last channel for the channel scan. First select a channel with CH .
CH then CL To unfix the CTCSS tone from the current channel.
CL Clearing key basically. Functions:
 Disable/enable squelch (will be reset at scanning).
 Backspace in editing and during inserting frequencies.
 Set/reset program squelch bypass flag
Queue then CL
Will reset current channel to the ROM settings (clearing current channel in RAM
memory).
Mode Selector + CL
Press simultaneously to reset all channels in the current memory bank to the ROM
settings (clearing the memory bank in RAM). Be aware: NO WARNING.
Queue Frequency insert mode. Press Queue and enter the frequency from numeric keypad. Use
CL to backspace at insertion. Attention: a frequency has 5 digits; the 6
th
digit will always
be a 0 or a 5 and is skipped. The frequency is automatically stored in the current channel.
All inserted frequencies are checked to frequency range and channel step (12.5 KHz for
all radios).
Therefore: a frequency (when manually entered) has 5 digits; the 6 th digit on the display
will always be a 0 or a 5 and is automatically skipped.