Storno CQM6113, Руководство пользователя, Страница: 4 / 14

1 Is the number of the string.
12345 Is a string with the ID number of your radio. The string is selected by successive
pressing the
Bell key. In total there are 9 strings, and you can change the ID
numbers by typing a new ID number from the keyboard.
+ Is the flag. Its purpose - add or not a message to the receiver ID number.
12ABC Is the message, to be sent to your opponent. The message can contain: 0-
9,A,B,C,D. Total size is 5 digits.
Keys, used in this mode :
0-9 For typing the number and "0-9,A,B,C,D" - for typing the message.
Bell To select the string.
A To switch on/off the "+" flag.
Tone To switch on/off the " " flag.
# The PTT analog key to send the Selective Call direct from that mode.

To switch between string numbers and message editing.
Queue To exit from this mode.
CL To backspace in editing.
The message that you sent to your opponent will be stored in the memory of his radio. Accordingly the
message that will be send to you will be stored in the memory of your radio. There are only 8 messages
to be stored in the memory.
To read the messages stored in the memory of your radio, set the Selective Call mode, click the Mode
selector then click the Bell key and finally click the S key (this state holds for 20 seconds without
pressing any key).
You will see the next string, for example:
1 12ABC where:
1 The number of message,
12ABC The message.
Use
Volume down and Volume up keys to navigate between messages.
Second pressing a key S will lead to exit from this mode.
Queue can also be used to exit from this mode.