Storm AXS Strikemaster ES, Инструкция по эксплуатации

Страница: 1 / 23

Strikemaster ES
Engineering Manual
Strikemaster ES Engineering Manual Page 1 of 1 For more information visit
www.storm-interface.com
Rev 2 March 2015 © Copyright Storm Interface. 2014. All rights reserved
The StrikeMaster ES is a robust and reliable Access Control keypad for installations requiring elevated security levels.
Constructed to survive in exposed, outdoor or unsupervised environments these keypads combine the field proven
durability of the StrikeMaster keypad with a remotely secured electronic control module.
The control module along with a dedicated high spec power supply is contained within an alarmed, secure steel
enclosure. This Secure Controller Unit (SCU) is located within the secured environment, protected from attempts to
breach or disable building security systems.
The Secure Controller Unit (SCU) supports up to two keypads and can control two doors
This manual covers the entire product range, and is available from
www.storm-interface.com/downloads .
Each individual product includes a printed datasheet with just the essential information for installation..
Table of Contents
Product Range
................................................................................................................................................................ 2
What’s in the Box ?
........................................................................................................................................................ 3
Installation for DXPS1K10 / DXPS1W10 .................................................................................................................... 4
Installation for DXPS1K30 / D DXPS1W30
................................................................................................................ 7
Programming Chart ........................................................................................................................................................... 9
Wall Fixing of Keypad – Fixing Centres Options .............................................................................................................. 11
Controller Connections – Pictorial View ......................................................................................................................... 12
Record Card ..................................................................................................................................................................... 13
Controller Setup .............................................................................................................................................................. 17
Programming Mode Functions
............................................................................................................................... 17
1 Add Entry Codes
............................................................................................................................................ 18
2 Remove Entry Codes .................................................................................................................................... 18
3 Enable / Disable Tamper Mechanism on SCU Case Door
................................................................... 19
4 Change Engineer’s Code
............................................................................................................................. 19
5 Set / Change Door Strike Time ................................................................................................................... 19
6 Enable Door Sensor
...................................................................................................................................... 20
7 Set Penalty Time
............................................................................................................................................. 21
9 Reset to Factory Defaults ............................................................................................................................ 21
Example System Configurations ..................................................................................................................................... 22
Whilst every effort is made to ensure details are correct at time of print, specifications are subject to change without notice.
Storm Interface products include technology protected by international patent and design registration. Storm is a trademark of Keymat Technology Ltd
Storm Interface is an ISO9001 registered company. Storm Interface is a trading name of Keymat Technology Ltd