62
Translation of the original instruction
General functional description:
The Power HD Krake captures the water blasted onto a facade (or any other surface, walls, ceilings, floors) by a high
pressure cleaner: the solid particles contained in the waste water are filtered out as of a particle diameter of 0.4 mm
so that the treated water can typically (depending on the local waste water authority’s regulations) be discharged into
a waste water channel in an environmentally friendly way. A high-pressure hose with the machine is attached to the
high-pressure cleaner and the cleaning attachment which blasts the water via an internal rotation nozzle onto the sur-
face to be cleaned. The suction unit creates a vacuum in the cleaning attachment so that the water is extracted directly
into the suction unit through the suction hose without any notable volume of water escaping from the cleaning attach-
ment.
This makes it possible to use the high pressure cleaner for interior work (e.g. stairwells / churches) without any addi-
tional preparation. The suction unit can be used with one or two motors depending on the required extraction perfor-
mance. To allow this to happen, the motors are switched separately at the main switch. The waste water is filtered in
the suction unit using a filter 400 mµ available and then continually discharged via the discharge hose by the integrat
-
ed immersion pump.
CAUTION
Use of the Power HD Krake is prohibited if materials with the following hazard symbols are processed:
Explosive
Extremely / highly flammable
The Power HD Krake's motors are not protected against explosion and may ignite materials marked as such. Please
always refer to the material manufacturer's MSDS. Never use materials with a flash point below 21° C.
CAUTION
The diameter of the discharge hose should not be below ¾“. The machine is supplied with a 400 my reusable filter.
Waste water regulations
CAUTION
Before discharging waste water into waste water channels, you must obtain a permit from the local water authority. If you intend
to discharge the waste water into a waste water channel, only use biodegradable strippers that comply with water hazard class I,
as dissolved strippers cannot be filtered. In all other cases, you may need to collect the waste water in tanks and dispose of the
waste water in line with your local water authority‘s regulations.
CAUTION
Acidic cleaning agents (e.g. stone cleaner) can cause damage to the cleaning attachment.
For any questions, please contact the STORCH hotline free throughout Germany at 0800-7867247.
Commissioning the Power HD Krake:
The high pressure cleaner and suction unit must be connected to separate power supplies as the suction unit requires a
current of approx. 11 A, and - depending on the pressure cleaner you use - a single 16 A power supply could be overloa-
ded. Place the upper suction basket and the upper container ring on the lower barrel and always connect the two using
the 3 tension locks! Using the high pressure hose, connect the high pressure cleaner to the cleaning attachment. Using
the suction hose connect the cleaning attachment and the suction unit. Plug the immersion pump plug (on the outside
of the barrel) into the socket provided on the suction basket. Check whether the suction unit, pump and discharge hose
are ready for operations. To do so, switch on the suction unit and the high pressure cleaner (switch the two motors on
the High Pressure System Krake on one after another - not at the same time, and then switch on the high pressure
cleaner) and place the cleaning attachment on the surface you wish to clean. Actuate the pistol grip on the cleaning
attachment and check whether the rotating nozzle is turning.
Содержание 658100
Страница 86: ...86 ...
