91
Use
Switching on and off, safety lock stroke rate (4):
Trigger switch (10) locked.
Trigger switch (10) unlocked.
Switching on, stroke rate
Press the trigger switch (10). The stroke rate can be changed by pressing in
the trigger switch.
Switching off
Let go of the trigger switch (10).
Work instructions
Sawing
Use a saw blade that is designed for the material to be sawed.
Press the machine against the part with the limit stop (13). Switch on the
machine and only then should the saw blade be pressed against the part.
Do not touch any objects or the ground with the moving saw blade (risk of
kickback, blade breaking!)
Adjust the stroke rate for the material to be sawed.
Avoid placing excessive pressure on the saw blade (particularly with long saw
blades).
Switch off the machine immediately if the saw blade gets jammed. Widen the
sawing gap a little using a suitable tool and remove the machine.
Once the saw cut is complete, switch off the machine. Only remove it from
the sawing gap and put away once the saw blade is no longer moving (risk of
kickback).
Lock the machine using the safety lock (4) to avoid it being unintentionally
switched on.
Translation of the original instruction
