Storch Kamine SIC 700 S, Руководство пользователя

Страница: 8 / 31

8
Gültig seit/Valid from/Valide: 09.10.2019

Silicon up to 180 °C
1.7.2 Servomotors
Parameters

Input voltage: 24 V/DC

Torque: 2 Nm standard servomotor; 2.5 Nm servomotor with return spring
1.7.3 Door switch
STORCH door switch connection:

Doors closed – switch contact disconnected

Doors closed – switch contact connected
Heat resistance of the STORCH door switch: 350 °C
2 INSTALLATION
2.1 Installation procedure
2.1.1 Step 1 – Basic installation
a. Install the combustion thermal sensor into the smoke flue flow. Only the tip measures
temperature, the rest of the sensor is made of a heat-resistant material that can survive
temperatures of up to 1100 °C.
o
Install into the location prepared by the furnace’s manufacturer
b. Installation of the control unit in the plastic box
o
Install in an area specified by the manufacturer
c. Installation of the display panel – LED display
o
install in the wood door
d. Installation of the door switch
o
The door switch automatically STARTS the burning regulator
o
Installation into the furnace’s frame (see the manual provided in the door switch
packaging)
2.1.2 Step 2 – Set up the burning regulator
Section 3.3 of the service menu describes how to setup the furnace.
2.1.3 Step 3 – Electrical connections
a. Connect the control unit to accessories according to the attached diagram (thermal
sensor, servomotor, door switch/start button)
b. Connect the control unit to the display panel with the 2-pin cable. On the display panel,
connect the blue conductor to the BU clamp and the brown conductor to the BN clamp.
c. Connect the 24 V/DC power adapter.
If installed in an environment with high industrial interference, use a voltage
filter and surge protection.