Storch Kamine MAGNA SE, Руководство пользователя

Страница: 17 / 39

- 15 -
The wood-burning stoves are designed in such a way that secondary air serves at the same time as “cleaning air”
for the glass. If the stove is used properly, the glass will remain generally clean. In spite of this a fine ash layer is
often inevitable due to poor-quality fuel (wet wood) or insufficient combustion air supply.
Only clean the glass when the stove has cooled down. For this purpose use a wet paper immersed in ashes. Within
it you can remove soot from the glass. Then, wet a clean sheet of paper and do the final cleaning of the glass.
Usually also liquid cleaning agents are used for cleaning the stove window. But these may in some cases,
depending on the composition of the cleaning agent and its interaction with combustion residues (ash particles,
etc.), harm the gaskets and/or the glass-ceramics and/or the decoration colour of the fireplace viewing panel.
The producer is not responsible for damages, which are caused by attack in using of chemical agents.
Small cracks in the fire brick are inevitable due to the heat load and under the conditions of normal use they do
not have any impact on the functionality and service life. In case of bigger damage contact an authorized retailer.
In regular intervals check the door gasket for damage and replace it if necessary.
Painted surfaces should be cleaned with a soft, dry cloth - never use abrasive means, fat solvents, wet cloths, etc.
Please, note that in spite of the painting the stove does not have a non-corrosive design !!!
7. Troubleshooting
7.1 Poor draught of the stove

Is the flue too low or is the cross-section unsuitable?

Are there leaks in the flue or the stove pipe?

Is the door of another stove that is connected to the same flue open?
7.2 The stove heats poorly

Is the room too large for the stove?

Is the ashpan full?

Is the smoke exhaust clogged?

Are the combustion air controllers closed?

Is the connection of the stove to the flue sealed?
7.3 The stove irradiates too much heat

Are the combustion air controllers opened completely?

Is the stove door completely closed? Is the ashpan fully closed?

Is there too much fuel in the chamber?
8. Fire protection
Please, instruct especially your children about this danger and during the heating operation of the stove
keep your children as far as possible. Burning of wood causes strong heating of the stove surface as well as
the control elements, but above all of the glass and the flue gas pipe. Never touch these parts without
corresponding protective clothing or aids as e.g. heat-resistant gloves. Do not put articles or clothing or
other item on the stove to dry. It is prohibited to put objects that are not heat-resistant on the stove or in its
vicinity. Put laundry drying stands or similar structures in a sufficient distance from the stove. Heating or
inserting of highly flammable or explosive substances as empty spray cans, etc. in the combustion chamber
or their storage in the immediate vicinity of the stove is strictly prohibited due to the risk of explosion.
When loading wood, do not wear loose or highly flammable clothes. During operation of your stove
processing of highly flammable and explosive substances in the same or adjacent rooms is forbidden.
9. Guarantee
Remember to read the attached guarantee certificate before you put your stove in operation. It
contains information about obligations that must be met for possible guarantee claims to be
recognized.
The guarantee does not cover damage caused by incorrect operation.