StorCentric Nexsan E48X, Руководство по снятию и замене

Страница: 21 / 41

Adding disk drives
CAUTION : Computer components and disk drives are sensitive to electrostatic discharge (ESD).
Always ground any electrostatic charge from your person before touching components with your
hands or with any tools. Always use an anti-static wrist strap (one ships with each Nexsan Storage
System) while installing or performing maintenance on any Nexsan Storage System. See
Take
proper ESD precautions on the previous page for detailed instructions.
Systems that are not fully populated with disk drives can have disk drives added to them at a later time.
Note The Spare Mode that the Nexsan Storage System is set to determines whether or not newly-inserted
disks are automatically assigned as pool spares. To check or set the spare mode, go to Configure RAID >
Spare Mode in the graphical user interface (GUI). See the Nexsan High-Density Storage User Guide for
more information.
►
To add disk drives to the Nexsan Storage Expansion:
1. Turn the drawer lock counter-clockwise to unlock the drive drawer.
Figure 2-2: Unlocking the drive drawer
The STAT LED turns amber to let you know that the drive drawer is unlocked.
CAUTION : Only open ONE drawer at a time. Fully close and lock each drawer before opening
another one. Failure to do so may overbalance the rack, causing equipment damage or injury
to personnel.
2. Carefully slide the drawer all the way out.
Figure 2-3: Sliding the drive drawer out
Chapter 2: Adding Modules
Nexsan E48X and Nexsan E60X
FRU Removal and Replacement Guide Nexsan
www.nexsan.com
13
2