6. Carefully slide the drawer front assembly upwards to disengage it, then remove it from the front of the
drive drawer.
Figure 3-10: Removing the drawer front assembly
7. Guide the replacement drawer front assembly onto the guides in the front of the drawer, then carefully
push down to seat it.
Figure 3-11: Replacing the drawer front assembly
The LEDs on the front of the drawer front assembly light up to let you know that the assembly is
properly in place.
8. Replace the retaining screws on the sides of the drive drawer.
9. Close the drive drawer lid.
10. Carefully slide the drawer back into the unit, making sure that it is flush with the other drawers.
11. Turn the lock clockwise to lock the drawer into place.
The
STAT
LED on the front of the drawer turns from amber to green to let you know that the drive
drawer is properly latched. The
ENV
LED lights up green to let you know that the fan is functioning
properly and that the drawer temperature is within specifications.
12. In the Nexsan GUI, go to the
Home
page and verify that the status bar for the replacement fan
assembly is green. See
Home Page
in
Chapter 3
of the
Nexsan High-Density Storage User Guide
for
more information.
Chapter 3: Replacing Modules
Nexsan E48X and Nexsan E60X
FRU Removal and Replacement Guide
Nexsan
23
3
Содержание Nexsan E48X
Страница 4: ...Glossary 27 Contents iv Part Number P0450141 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 8: ...About this manual viii Part Number P0450141 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 18: ...Physical characteristics 1 10 Part Number P0450141 Rev B www nexsan com Nexsan BEAST and E Series...
Страница 34: ...Rear drive drawer fan assembly 3 26 Part Number P0450141 Rev B www nexsan com Nexsan BEAST and E Series...
