8
Installation
StorCase Technology, Inc.
SATA-to-USB 2.0 DE110 User's Guide - Rev. A00
INSTALLATION
NOTES:
The SATA-to-USB 2.0 DE110 "universal" receiving frame (indicated by the
BLUE LED) will accept both PATA (supports both USB 1.1 and USB 2.0) and
SATA (supports only USB 2.0) DE110 carriers.
SATA DE110 "universal" receiving frames (also indicated by a BLUE LED) will
also accept SATA-to-USB 2.0 DE110 carriers.
For USB 2.0 operation, a USB 2.0 controller and USB cable (provided) are re-
quired.
Windows® 2000/XP both support USB 2.0. For Windows® 98, a driver down-
load is required (at:
http://www.storcase.com/support/firmware.asp
).
Preparation
NOTE:
A #2 Phillips screwdriver will be required during this procedure.
While performing the steps in this section, work on a soft surface to prevent excessive shock
to the drive being installed. Also refer to the manufacturer's documentation provided with the
drive.
1.
Remove the drive from its protective packaging.
2.
Plastic Drive Bezel:
If the drive came equipped with a plastic front bezel, it must
be removed before installing the drive into the drive carrier.
All manuals and user guides at all-guides.com
