Page 5
INSTALLATION AND CONNECTION
2.1 – Install The Camera
Paste the supplied installation sticker to the location
where your camera will be installed.
Based on your installation environment, drill a hole in
the middle of the sticker for the power and data cable to
put through later if necessary.
Slightly fasten the screws to (a) and (b) as indicated, and
make sure the screws are not fully tightened.
1)
2)
3)
Based on your installation environment, put the power and data cable through the bracket, and determine the
cabling of your camera:
3-1: The cable walks along the wall
3-2: The cable is hidden on the other side of the wall
Hook the bracket with the camera to the screws fastened in step 2, and push it down to fix the bracket.
Secure the screws on (a) and (b), and fasten the other two screws to (c) and (d) to fix the bracket.
