STONEFLY ISC-1208s, Руководство по установке

Страница: 21 / 58

StoneFly ISC Setup Guide Initial Installation
V8.0.3x © StoneFly Inc. | All rights reserved Page 20
Sliding the Chassis onto the Rack Rails
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both sides.
When the chassis has been pushed completely into the rack, it should click into the
locked position.
4. Optional screws may be used to hold the front of the chassis to the rack.
Figure 8: Installing the Chassis into a Rack
Note: The figure above is for illustrative purposes only. Always install servers to the bottom of
the rack first.
Warning: Mounting the system into the rack requires at least two
people to support the chassis during installation. Please follow the
safety recommendations printed on the rails.
Caution: Do not pick up the server with the front handles. They are designed
to pull the system from a rack only.