STONEFLY ISC-1208s, Руководство по установке, Страница: 16 / 58

StoneFly ISC Setup Guide Initial Installation
V8.0.3x © StoneFly Inc. | All rights reserved Page 15
3.1 Setting Up the ISC
This section will provide step-by-step instructions for initial system configuration and hardware
setup of the ISC.
3.1.1 Unpacking
Unpack the hardware from the box. You will find:
• The ISC appliance
• The front bezel for the ISC
•
Power cords
•
A product registration card for the ISC
•
A documentation CD with the StoneFly Storage Concentrator User’s Guide and all other
documentation
•
A StoneFusion Operating System CD for system recovery
•
This setup guide
3.1.2 Rack Installation Instructions
This section provides information on installing the StoneFly ISC appliance into a rack or cabinet
with the rails provided. There are a variety of rack/cabinet units on the market, which may mean
that the assembly procedure will differ slightly. You should also refer to the installation
instructions that came with the rack unit you are using.
NOTE: This rail will fit a rack/cabinet between 26" and 33.5" deep.
Identifying the Sections of the Rack Rails
The StoneFly ISC chassis package includes two rack rail assemblies in the rack mounting kit.
Each assembly consists of three sections: an inner rail that secures directly to the chassis, an
outer rail that secures to the rack, and a middle rail which extends from the outer rail. These
assemblies are specifically designed for the left and right side of the chassis.