background image

866-795-1586 • WWW.STONEAGETOOLS.COM

34

Warranties set forth herein extend only to End-Users, meaning 

customers acquiring, or that have previously acquired, a 
product manufactured by StoneAge (“Product”) for their own 
use and not for resale, either directly from StoneAge Inc. 
(“StoneAge”) or from a StoneAge Authorized Dealer or Reseller 
(“Dealer”).  No warranty of any kind or nature is made by 

StoneAge beyond those expressly stated herein.  

1. 

LIMITED WARRANTY PERIOD.

  Subject to the limitations 

and conditions hereinafter set forth, StoneAge warrants its 

Product to be free from defects in workmanship and material 
for a period of one (1) year from the date of purchase by the 
End-User, provided that the end of the limited warranty period 
shall not be later than eighteen (18) months from the date of 
shipment of the Product to the Dealer or the End-User by 
StoneAge (“Limited Warranty Period”).  All replacement parts 
which are furnished under this Limited Warranty and properly 
installed shall be warranted to the same extent as the original 
Product under this Limited Warranty if, and only if, the original 
parts were found to be defective within the original Limited 
Warranty Period covering the original Product.  Replacement 
parts are warranted for the remainder of the original Limited 
Warranty Period.  This Limited Warranty does not cover any 

component part of any Product not manufactured by StoneAge.  
Any such component part is subject exclusively to the 
component manufacturer’s warranty terms and conditions.

2. 

LIMITED WARRANTY COVERAGE. 

 StoneAge’s sole 

obligation under this Limited Warranty shall be, at StoneAge’s 
option and upon StoneAge’s inspection, to repair, replace or 

issue a credit for any Product which is determined by StoneAge 
to be defective in material or workmanship.  StoneAge 
reserves the right to examine the alleged defective Product 
to determine whether this Limited Warranty is applicable, and 
final determination of limited warranty coverage lies solely 
with StoneAge.   No statement or recommendation made by 

a StoneAge representative, Dealer or agent to End-User shall 
constitute a warranty by StoneAge or a waiver or modification 

to any of the provisions hereof or create any liability for 
StoneAge.    

3. 

WARRANTY SERVICE PROVIDERS.

  Service and repair of 

the Product is to be performed only by StoneAge authorized 
service representatives, including Dealers who are authorized 
repair centers, with StoneAge approved parts.  Information 

about StoneAge authorized service representatives can be 
obtained through the StoneAge website at www.stoneagetools.
com/service.  Unauthorized service, repair or modification of 

the Product or use of parts not approved by StoneAge will void 
this Limited Warranty.  StoneAge reserves the right to change 

or improve the material and design of the Product at any time 
without notice to End-User, and StoneAge is not obligated to 
make the same improvements during warranty service to any 

Product previously manufactured.

4. 

WARRANTY EXCLUSIONS.

  This Limited Warranty does 

not cover, and StoneAge shall not be responsible for the 
following, or damage caused by the following:  (1) any Product 
that has been altered or modified in any way not approved by 
StoneAge in advance in writing; (2) any Product that has been 
operated under more severe conditions or beyond the rated 
capacity specified for that Product; (3) depreciation or damage 
caused by normal wear and tear, failure to follow operation or 
installation instructions, misuse, negligence or lack of proper 
protection during storage; (4) exposure to fire, moisture, water 
intrusion, electrical stress, insects, explosions, extraordinary 
weather and/or environmental conditions including, but not 
limited to lightning, natural disasters, storms, windstorms, hail, 
earthquakes, acts of God or any other force majeure event; 
(5) damage to any Product caused by any attempt to repair, 
replace, or service the Product by persons other than StoneAge 
authorized service representatives; (6) costs of normal 
maintenance parts and services; (7) damage sustained during 
unloading, shipment or transit of the Product; or (8) failure to 
perform the recommended periodic maintenance procedures 
listed in the Operator’s Manual accompanying the Product.   

5. 

REQUIRED WARRANTY PROCEDURES.

  To be eligible for 

warranty service, the End-User must:  (1) report the Product 
defect to the entity where the Product was purchased (i.e. 
StoneAge or the Dealer) within the Limited Warranty Period 
specified in this Limited Warranty; (2) submit the original 
invoice to establish ownership and date of purchase; and 
(3) make the Product available to a StoneAge authorized 
service representative for inspection to determine eligibility for 
coverage under this Limited Warranty.  This Limited Warranty 
shall not extend to any person or entity who fails to provide 
proof of original purchase from StoneAge or a Dealer.  No 
Product may be returned for credit or adjustment without prior 
written permission from StoneAge.   

6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER 
REMEDIES.  EXCEPT AS EXPRESSLY STATED HEREIN 
(AND TO THE FULLEST EXTENT ALLOWED UNDER 

APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WITHOUT LIMITATION ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE, AND ANY AND ALL 
WARRANTIES, REPRESENTATIONS OR PROMISES AS 

TO THE QUALITY, PERFORMANCE OR FREEDOM FROM 

DEFECT OF THE PRODUCT COVERED BY THIS LIMITED 
WARRANTY.  STONEAGE FURTHER DISCLAIMS ALL IMPLIED 
INDEMNITIES.

WARRANTY:

 

TERMS AND CONDITIONS AND WARRANTY INFORMATION

Содержание BADGER BA-H6





































Отзывы: