manualshive.com logo in svg

StoneAge AUTOSTROKE AST-200-V2, Руководство пользователя

Поделиться
Скачать
StoneAge AUTOSTROKE AST-200-V2 Скачать руководство пользователя страница 17

17

866-795-1586 • WWW.STONEAGETOOLS.COM

OPERATION

AUTOSTROKE AST-200-V2 FUNCTIONS

•  

With the AutoStroke in the

 “OFF”

 Position, run the Autobox Tractor in Reverse until the Air Motor Generator goes silent. This may take up 

to one minute and will allow the Air Motor Generator to charge.  

•  

Turn the AutoStroke toggle to the

 “ON”

 Position and make sure the power light comes on.

•  

To setup the AutoStroke turn the 

SENSITIVITY

 knob all the way in the counter-clockwise direction. (Increase turn clockwise, Decrease 

turn counter-clockwise)

•  

Next position your nozzles so they hit the tube sheet face and run them into the tube sheet.  While holding the feed in lever increase the 

sensitivity until it just starts to peck at the tube sheet face.

•  

Adjust the 

RETRACT DISTANCE

 (Increase turn clockwise, Decrease turn counter-clockwise) until you like how far it is retracting the 

nozzles.

•  

The AutoStroke is now operational.

+          -

+          -

Содержание AUTOSTROKE AST-200-V2





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды