Stone RP522 Скачать руководство пользователя страница 19

Страница: 19 / 36

- 19 -

3. OPERATION

RP522 & RP652

3.5 WHO IS ALLOWED TO OPERATE

THE MACHINE?

Only suitably qualified, instructed, and authorized

persons over 18 years of age may operate the

machine. Maintenance and repairs, particularly on

the hydraulic system, require special knowledge and

must be undertaken only by qualified personnel.

3.6 CONVERSIONS AND MODIFICATIONS

TO THE MACHINE

Unauthorized modifications and conversion of the

machine are not permitted for safety reasons.

Spare parts and special equipment not delivered by

us are also not approved by us. The installation and/

or the use of such parts can also have a detrimental

effect on the operating safety.

The manufacturer disclaims all liability for any

damage resulting from the use of non-original parts

or special equipment.

3.7 SAFETY INFORMATION IN THE

OPERATING AND MAINTENANCE

INSTRUCTIONS

The following signs and designations are used in the

manual to designate instructions of particular

importance:

Important

- Refers to special information on how to

use the machine most efficiently.

Attention

- Refers to special information and/or

orders and prohibitions directed towards preventing

damage.

Refers to orders and

prohibitions designed to prevent injury or extensive

damage.

3.8 TRANSPORTING THE MACHINE

Only load and transport the machine as specified in

the operating instructions.

Only use suitable means of transport and lifting gear

with sufficient bearing capacity.

Attach suitable slinging means to the points of

attachment provided.

Only use sturdy loading ramps with sufficient

bearing capacity. The ramp inclination must be

flatter than the gradient climbing ability of the

machine.

Secure the machine to prevent it from tilting or

slipping.

It is highly dangerous to walk or stand under

suspended loads.

Secure the machine on transport vehicles to prevent

it from rolling, slipping, and tilting.

3.9 BEFORE STARTING OPERATIONS

WEAR PERSONAL PROTECTIVE

EQUIPMENT TO PREVENT LOSS OF

HEARING. OBSERVE THE SAFETY

REGULATIONS. OBSERVE THE OPERATING

AND MAINTENANCE INSTRUCTIONS.

BEFORE PUTTING THE MACHINE INTO

SERVICE, PLEASE READ THE OPERATING

MANUAL FOR THE ENGINE.

Park the machine on level ground.

Check the engine oil level.

Check the fuel level.

Top off missing lubricants according to the

lubricant chart.

Check screw connections for tightness.

Check condition of engine and machine.

WARNING

Содержание RP522





































Результаты поиска

Содержание RP522

Отзывы:

Похожие инструкции для RP522

Бренды по названию

Популярные бренды

Stone RP522, Руководство оператора

Результаты поиска

Содержание RP522

Отзывы:

Похожие инструкции для RP522

Бренды по названию

Популярные бренды