manualshive.com logo in svg

Stone RP522, Руководство оператора

Поделиться
Скачать
Stone RP522 Скачать руководство пользователя страница 21

- 21 -

3.  OPERATION

RP522 & RP652

3.15  OPERATING CONTROL AT THE

TOW-BAR

A  forward

B  reverse

The control lever serves for adjustment of the

unbalances in the exciter and in turn for continuous

regulation.

•

Forward (A), point compacting (0),

reverse (B)

•

The speed of the machine

Important 

- The control lever remains automatically

in position only when set to the maximum forward

travel setting (a).  In any other position, the control

lever moves in the direction of maximum forward

travel when released.  If the control lever is operated

too quickly several times, the shift lever will block in

reverse travel.  In this case:

•

Release lever in forward travel position up to

maximum forward travel position.

•

Blocking is cleared within a few seconds and

perfect shifting is possible.

The control lever can be operated only with the

engine running.  The lever blocks if operated when

the machine is stationary.  Blocking is immediately

cleared when the engine is restarted.

3.16  ADJUSTING THE TOW-BAR

By turning the adjustment-screw (2), the tow-bar can

be set to any position so as to obtain the best working

height on the tow-bar grip.

In case of loading and transporting, the tow-bar has

to be locked in an upright position by turning up the

locking bolt.

When loading and transporting, the tow-bar must be

locked vertical by moving the latch (1).

1

2

II

I

0

A

B

Содержание RP522





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды