Stone RP522, Руководство оператора

Страница: 20 / 36

- 20 -
3. OPERATION
RP522 & RP652
3.10 STARTING THE MACHINE
Prior to starting, familiarize yourself with the
operating and control elements, the mode of
operation of the machine, and the working
environment. This includes, e.g. obstacles in the
working area, bearing capacity of the ground, and the
necessary safety provisions.
Use personal protective equipment (safety footwear,
hearing protection, etc.).
Check to ensure that all safety devices are firmly in
place.
Do not start the machine if instruments or control
devices are faulty.
For machines with hand-start, only use the safety
cranks tested by the manufacturer, and precisely
follow the operating instructions of the engine
manufacturer.
Precisely follow the starting and stopping procedures
specified in the operating instructions and observe
indicator lights.
Starting and operation of the machine in potentially
explosive atmospheres is forbidden!
3.11 STARTING IN ENCLOSED SPACES,
TUNNELS, MINES OR DEEP DITCHES
Engine exhaust fumes are highly dangerous!
For this reason, when operating the machine in
enclosed spaces, tunnels, mines or deep ditches, it is
important to ensure that there is sufficient air to
breathe (see UVV “Construction Work”, VBG 37,
paragraphs 40 and 41).
3.12 MACHINE CONTROL
Operating devices that adjust themselves
automatically when released in normal use must not
be locked.
Check protective devices and brakes for proper
functioning prior to operation.
When reversing, particularly on the edges and banks
of ditches, as well as in front of obstacles, the
machine operator can fall or be crushed.
Always keep a safe distance away from the edges and
banks of ditches and refrain from any actions that
could cause the machine to topple over.
Always control the machine so that hand injuries
through hard objects are avoided.
Always ascend slopes carefully in a direct path.
Reverse up steep slopes to prevent the machine from
toppling over onto the machine operator.
If faults on the safety devices or other faults
detrimental to the safe operation of the machine are
noticed, operation of the machine must be stopped
immediately and the faults remedied.
When undertaking compaction work in the vicinity of
buildings or above pipelines and similar, check the
effect of the vibrations on the buildings and pipes
and stop compaction work if necessary.
3.13 PARKING THE MACHINE
Park the machine on a firm and level surface.
Shut down the drive and secure it to prevent
accidental movement and unauthorized use. If
available, close the fuel valve. Do not place or store
equipment with integrated moving gear on the
chassis. The moving gear is intended only for
transportation purposes.
3.14 FILLING GASOLINE
Only fill gasoline with the engine shut down. No
open fire, do not smoke. Do not spill any fuel.
Collect discharging fuel in a suitable container and
prevent fuel from seeping into the soil. Ensure that
the filler cap is tight.
Leaky fuel tanks constitute an explosion hazard and
must therefore be replaced immediately.