13
866-795-1586 • WWW.STONEAGETOOLS.COM
2
2
1
3
3
ROLLER
HOSE O.D.
SPIR
STAR
PARKER
COLLET SIZE
COLLET PART
NUMBER
HOSE STOP SIZE
HOSE STOP
PART NUMBER
Ø 1.94 IN.
ORANGE
.27-.41 in
(7 mm - 10 mm)
3/2
2240D-02
.297 in. / 8 mm
ABX 121-297
.27-.34 / 7-9 mm
HS 121-27-34
3/4, 4/2
2240D-025, 2440D-02
.328 in. / 8 mm
ABX 121-328
.27-.34 / 7-9 mm
HS 121-27-34
3/6, 5/2
2240D-03
.406 in. / 10 mm
ABX 121-406
.34-.42 / 9-11 mm
HS 121-34-42
Ø 1.85 IN.
BLACK
.44-.50 in
(11 mm - 13 mm)
4/4
2448D-025
.438 in. / 11 mm
ABX 121-438
.34-.42 / 9-11 mm
HS 121-34-42
4/6, 5/4
2240D-04
.460 in. / 12 mm
ABX 121-460
.42-.50 / 11-13 mm
HS 121-42-50
6/2
2640D-025 2740D-025
.484 in. / 12 mm
ABX 121-484
.42-.50 / 11-13 mm
HS 121-42-50
6/4
2440D-04
.516 in. / 13 mm
ABX 121-516
.50-.56 / 13-14 mm
HS 121-50-56
Ø 1.75 IN.
BLUE
.52-.61 in
(13 mm - 16 mm)
5/6, 8/2
2240D-05, 2740D-03
.547 in. / 14 mm
ABX 121-547
.50-.56 / 13-14 mm
HS 121-50-56
5/6H, 8/4
.594 in. / 14 mm
ABX 121-594
.56-.61 / 14-16 mm
HS 121-56-61
2440D-05
.625 in. / 15 mm
ABX 121-625
.56-.61 / 14-16 mm
HS 121-56-61
HOSE GUIDE ASSEMBLY SET-UP
StoneAge (SA)
PART NUMBER GUIDE TUBE REFERENCE CHART
GUIDE TUBE
BANSHEE
INSIDE DIAMETER, LENGTH
ABX 115-12
BN9.5
.459 in / 12 mm, 12.5 in. / 318 mm
ABX 115-36
BN9.5
.459 in / 12 mm, 36 in. / 914 mm
ABX 116-12
BN13
.546 in / 14 mm, 12.5 in. / 318 mm
ABX 116-36
BN13
.546 in / 14 mm, 36 in. / 914 mm
ABX 117-12
BN15
.674 in / 17 mm, 12.5 in. / 318 mm
ABX 117-36
BN15
.674 in / 17 mm, 36 in. / 914 mm
ABX 119-12
BN18
.745 in / 19 mm, 12.5 in. / 318 mm
ABX 119-36
BN18
.745 in / 19 mm, 36 in. / 914 mm
HOSE GUIDE ASSEMBLY
1. Select the appropriate Guide Tube size and length for the application from the chart at the bottom of the previous page.
• The length of the Guide Tubes for an exchanger bundle with no channel head is 12.5 in. (318 mm).
• A deeper channel head will require extended Guide Tubes. The depth of the channel head added to the 12.5 in. (318 mm) length will
give the desired tube length.
• Longer guide tubes are available if required for use with channel heads.
NOTICE
The Banshee tool should not have excessive clearance if the correct length Guide Tube size is used.
2. To remove the existing Guide Tubes, loosen the Tube Clamp Lever and the Pitch Adjust Lever, located on top of the Hose Guide
Assembly. After selecting the appropriate Guide Tubes, install the Guide Tubes into the Hose Guide Assembly.
3. Secure the Guide Tubes by tightening the Tube Clamp Lever and Pitch Adjust Lever, when the desired pitch has been set.
4. Select the appropriate Collet and Hose Stops from the chart on the previous page and reserve them for future Hose and Collet
installation instructions in this manual.
WARNING
Appropriate size Collet selection is
CRITICAL
to ensuring proper backout prevention of the tool.
