Stoll CMS 502 HP+ Скачать руководство пользователя страница 547

Страница: 547 / 562

547

Machine Management Tools

Send email directly from the machine

Attach files to the email You can attach any files to an email which are sent with the message. In order

to reduce the size of the file, the files to be attached can be zipped

(compressed).
1. Tap on "Mail attachment" key.



The "Mail attachment" window opens.

Mail attachment window

"Mail attachment" window

2. In "Mail attachment" window, select the file that has to be attached.
3. Confirm selection.



The file is displayed in the "File name" field.

4. If additional files are to be attached, repeat the steps 1 to 3.
5. If the files in the "File name" field are to be attached zipped to the email,

tap on "Zipped" key.
- or -

➜ If the files in the "File name" field are to be attached unzipped to the email,

tap on "Unzipped" key.

Send email



Sender and receiver addresses have been entered correctly.



The message is entered.



The email attachments are selected.

➜ Tap on "Send email" key.



The email is sent with the attachments.

In order to remove a file from the "File name" field, mark this file

and then tap on the "Delete marked entry" key.

Содержание CMS 502 HP+



















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды

Stoll CMS 502 HP+, Руководство по эксплуатации

Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды