Stoll CMS 502 HP+ Скачать руководство пользователя страница 505

Страница: 505 / 562

505

Software - Installation and basic settings

Installing the Stoll operating system

7. If necessary, change the data and confirm the changes.
8. Proceed to the next window.



The "Machine Parameter" window is displayed. The data is set at the
factory.

9. If necessary, change the data and confirm the changes.
10. Proceed to the next window.



The "Needle bed parameters" window is displayed. The data is set at
the factory.

11. If necessary, change the data and confirm the changes.
12. Proceed to the next window.



The "NPK-Values" window is displayed. The data is set at the factory.

13. If other NPK values are to be used, change the values and confirm the

changes.

14. Proceed to the next window.



The "Knit Report Configuration" window is displayed.

15. If other settings are to be used, change the settings and confirm the

changes. Use the "additional function keys" to activate/deactivate the

running time control and/or running time measurement.

16. Proceed to the next window.



The configuration is complete.
The "Reference runs" window is displayed.

17. Carry out reference run(s).
18. Proceed to the next window.



The restart is complete and the "Main menu" is displayed.
The machine is ready to knit.

Further information:



Setting touch screen [



80]



Setting machine parameters [



197]



Setting waiting time until warm start [





Configuring network [



476]

Machine fault!

The presence or lack of machine options must correctly be

specified, as otherwise a fault may occur on the machine.

Always specify the machine options correctly.

Содержание CMS 502 HP+



















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды

Stoll CMS 502 HP+, Руководство по эксплуатации

Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды