STOKVIS ENERGY SYSTEMS REX F, Техническое руководство

Страница: 4 / 38

4
1 GENERAL WARNINGS
Each generator is provided with a manufacture plate that can be found in the envelope with the boiler
documents. The plate lists:
 Serial number or identification code;
 Rated thermal output in kcal/h and in kW;
 Furnace thermal output in kcal/h and in kW;
 Types of fuels that can be used;
 Max operating pressure.
A
manufacture certificate
is also provided which certifies the hydraulic test positive performance.
The installation must be performed in compliance with the regulations in force by professionally qualified
personnel . The term “professionally qualified personnel” means persons with specific technical skills in the
sector of heating system components.
Incorrect installation may cause damage to persons, animals or objects for which the manufacturer cannot be held
responsible.
At the first start up , all regulation and control devices positioned on the control panel should be checked for
efficiency. The guarantee shall be valid only upon compliance with the instruction given in this manual.
Our boilers have been built and tested in observance of EEC requirements and, as a consequence, CE-marked. EEC di-
rectives are as follows:
 Directive on Gas 2009/142/CE
 Directive on Output 92/42/EEC
 Directive on Electromagnetic Compatibility 2004/108/CE
 Directive on Low Voltage 2006/95/CE
IMPORTANT: This boiler has been designed to heat hot water at a temperature inferior to the boiling tem-
perature at atmospheric pressure and must be connec ted to a heating plant and/or a domestic hot water
plant within the limits of its performance and output.
ATTENTION: REX F, REX K F and REX DUAL F models featuring aluminum finned extru-
sions in their fire tubes (Fin-e patented) are suitable exclusively for use with gaseous fuels.