8
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully lift grill from the carton and place it on a level
work surface.
Inspect the grill carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected the grill, identified all loose parts, and
satisfactorily operated the grill.
NOTE:
Some loose parts are located inside the grill
assembly beneath the hood.
If any parts are damaged or missing, please call
1-800-847-5993 for assistance.
Fig. 5
STEP 1: ASSEMBLING THE WHEELS
See Figure 5.
Place a washer (GG) onto the axle (EE), then slide the
axle through the center of the wheel (F).
Then place another washer (DD) and a lock washer (CC)
onto the other side of the axle.
Screw the axle into the rear brace to secure the wheel in
place.
Repeat for other side.
0
WHEEL (F)
AXLE (EE)
WASHER (GG)
WASHER (DD)
LOCK
WASHER (CC)
WARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
WARNING:
If any parts are damaged or missing, do not operate
this grill until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
CAUTION:
Some parts may contain sharp edges that may cause
personal injury. Wear protective gloves if necessary.
STEP 2: INSTALLING PLASTIC FEET
See Figure 6.
Position feet on stand (arrows pointing outward) and press
them place.
NOTE:
If feet do not fit tight against the leg, lightly tap
them with a mallet.
