10
ASSEMBLY
STEP 4: LOWERING THE GRIDIRON
™
GRILL
TO THE TRANSPORT OR STORAGE POSITION
See Figure 10.
Never place the GRIDIRON
™
grill in the transport or storage
position until the grill is completely cool, the LP gas cylinder
is removed.
NOTE:
When transporting or lowering the grill, install the
removable grate insert securely. This will help to keep all
grates in place.
From the standing position, place foot on leg stand lower
crossbar and hand in slot of side table.
Slowly release the grill lock by swinging the lock up and
away from the screw.
Lift the side table until it stops then carefully lower the
GRIDIRON
™
grill until the firebox rests on the leg stand.
Once the GRIDIRON
™
grill is in the transport or storage
position, move your foot and wheel the grill easily from
place to place.
WARNING:
Failure to remove the LP gas cylinder or move while hot
could result in serious personal injury.
STEP 5: ATTACHING FIREBOX HANDLE
See Figures 11 - 12.
Lift the hood latch then raise firebox hood.
Line up holes in firebox handle (A) with holes in hood.
Slide a lock washer (BB) onto the screw (AA) and through
the grate holding plate (B) and the firebox hood then into
the handle (A). Tighten securely.
Repeat for other side.
0
Fig. 11
HOOD
HOOD
LATCH
Fig. 10
