15
OPERATION
RESETTING THE GAS REGULATOR SAFETY
DEVICE
Since 1995, all regulators include a safety feature that re-
stricts gas flow in the event of a gas leak. If you turn on the
control knob before turning on the cylinder valve, you can
activate this feature. Even with the burner turned on high,
the grill won’t get hotter than 250°F to 300°F. It will then be
necessary to reset the gas regulator safety device.
To reset:
Open the hood.
Turn control knob off.
Disconnect the regulator from the LP gas cylinder.
Wait 30 seconds then reconnect to the regulator.
Follow igniting instructions.
USING THE GRILL AND ACCESSORIES
To use the grate:
Turn on the grill and close the hood. Preheat the grill for
10 - 15 minutes.
Open the hood and place the food on clean grates then
replace the hood. Cooking time will vary depending on
personal preference.
NOTE:
When grilling fish, the meat is typically done when
it flakes easily with a fork. If any part of the meat is glossy
in appearance, it is not done.
When finished cooking, turn the control knob off.
After the grill has cooled, clean grates and grease tray.
WARNING:
Never use an accessory if the porcelain coating is dam-
aged or chipped. Use with a damaged coating could
result in serious personal injury if ingested.
