Stocks AG Fan Jet Mini i-CON 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 19 / 24

19
19 Calibration Hopper
Part No. FJ-005-CAL-MINI
Fitting Instructions
(Similar machine shown)
1. With an empty hopper, remove the feed block assembly
from the machine
2. Slide the Calibration Hopper into the Fan Jet in place of
the feed block with the hopper uppermost, ensure the drive
shaft aligns and secure with the supplied screw knobs.
4. Secure with the two small blacks PVC knobs supplied.
3. Insert the (removed) feed block into the Calibration
Hopper, ensure the drive shaft aligns by slowly rotating the
feed shaft
5. Place a suitable container under the Calibration Hopper to collect pellets whilst calibrating