Stocks AG Fan Jet Mini i-CON 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 12 / 24

12
12-1 Fitting to a vehicle or parent machine
Safe lifting practice to be observed when handling the machine as the net weight is over
25kg. Safety shoes and protective gloves to be worn when handling the machine
With a full hopper the 65L machine could weigh in excess of 90kg and the 130L machine 95kg and
so ensure the machine is securely attached to a suitably strong rigid mounting point. If unsure
seek advise from the parent machine manufacturer or supplier. Locally fabricated mounting frames
are not the responsibility of Stocks AG Ltd
NOTE the machines can be operate facing forwards or backwards. Ensure the disc height is a
minimum of 1 metre above the crop canopy or the ground – more height may improve the
maximum spread width.
Ensure the power cable is connected direct to the parent vehicle 12v battery and the fuse is fitted
correctly.
12-2 Optional ATV Fitting Kit
Part No. FJ-005-BKT (available through your local dealer)
WARNING
Always check specification of any ATV rear carrier before ordering
Many rear carriers will not have the load carrying capacity to support the weight of a ful-
ly laden Fan Jet mounted on an ATV kit.
Please check with your ATV supplier as modification may be available.
The Stocks ATV Kit provides a quick and easy way to attach your Fan Jet to the rear carrier of your
ATV. Designed as a universal fitment to elevate the Fan Jet to gain more height to the spinning
disc. The formed steel base plate with quick fit clamps and jacking screws to mount the machine to
the base plate and to adjust the angle of the disc when the ATV is fully laden. The kit includes an
operator protection plate which bolts onto the
back frame of the machine plus a short power and
connector cable to maximise the power at the disc
motor.
These are to be fitted rather than the standard
length cables supplied with the Fan Jet machine.
WARNING the i-CON instrument is not
waterproof and so will need to be protected
12-3 Optional UTV Fitting Kit
Part No. FJ-005-UTV (available through your local dealer)
The cost option UTV kit available for most UTV fitments
Offering a sturdy fitting option with 4 hooked anchor points with hand release fittings.
One piece tubular steel construction with detachable machine mounting plate.
Fixed fork lift point safe and easy lifting on and off vehicle.