Stocks AG Fan Jet Duo, Общие инструкции по установке и эксплуатации

Страница: 30 / 31

Fan Jet Pro - Operating Manual & Parts List P30
Always ensure the machine is switched off and the power supply isolated
before carrying out any checks
PERSONAL PROTECTION EQUIPMENT: It is the responsibility of the operator or maintenance
persons handling the machine to ensure the appropriate personal protection equipment is worn for
the material being applied or to prevent contamination to the machine or the environment.
*If unsure contact the material supplier for more information.
WARNING Always observe all application standards and guidelines provided by the product
manufacturer as some products may be toxic !
Spinning Disc will not rotate
1. Check that the power cable is connected direct to the vehicle battery
2. Check power supply cable for any damage
3. Check and check the in line fuse and replace if necessary
4. Check the motor by powering from an independent power supply and replace if necessary
5. Check power supply from control panel to machine if no power replace control panel
Feed Shutters will not operate correctly
1. Check that the power cable is connected directly to the vehicle battery and check the fuse
2. Check that the power cable polarity matches the battery polarity
3. Check the instrument cable for any damage
4. Check for any blockages or foreign objects jamming the feed mechanism (see section 9 - 1)
5. Check the shutter slave motors operate freely and replace if faulty
6. Check power from switch wire to slave motor for pulse of current when switch is operated
7. If no current detected possible panel failure
8. If constant current detected; the panel is faulty and needs to be replaced
The information, technical data and dimensions are correct at the time of printing be we reserve the right to
change and improve them. This machine has been manufactured to the highest standards but care needs to be
taken whilst using it to prevent injury to the user or third parties.
24.0 Fault Finding