Stocks AG Fan Jet Duo, Общие инструкции по установке и эксплуатации

Страница: 19 / 31

Fan Jet Pro - Operating Manual & Parts List P19
To adjust the feed rate, undo the black plastic locking knob at the centre rear of the hopper and slide the
feed regulator plate to the required setting, reading from the 0
- 10 scale decal. Re - tighten the locking knob.
Position 10 is the highest feed rate with the feed apertures fully open as shown in the photo below
NOTE we recommend you carry out your own product calibration test for each product and
application rate.
Feed scale
The complete feed mechanism can be rotated to bias the spreading arc to the left or right, and even out the
spread pattern equally from the centre
- line of the machine for in - field work, and as a headland control at
field borders. To adjust, undo the black plastic locking knob on the side of the machine and using the
stainless steel motor cover, rotate the complete circular mechanism as far as required, moving the indicator
dimple in the direction in which you want the arc to swing. Re
- tighten the locking knob.
Locking Knob
Locking Knob
14.0 Setting the Feed Rate
14.1 Setting the Spread Bias
(Factory set at 90 degrees)