STMicroelectronics UM1036, Руководство пользователя

Страница: 31 / 48

UM1036 Description of jumpers, test pins, and connectors
Doc ID 18293 Rev 1 31/48
6 Description of jumpers, test pins, and connectors
Table 6 , 7 , and 8 give a detailed description of the jumpers, test pins, and the pinout of the
connectors used.
Table 6. Jumper description
Jumper Selection Description
W1
A position V
DD
= 3.3 V
B position V
DD
= 5 V
W2
A position Software brake applied
B position Disabling of OCP
W3
Present Supplying of MCU unit with V
DD
Not present MCU is supplied separately
W4
Present Tachometer connected
Not present Hall or encoder connected
W5
Present Hall or encoder connected
Not present Tachometer connected
W6
A position A position - V
DD
for Hall / encoder
B position B position - +5 V for Hall / encoder
W7
Present Any single-shunt configuration
Not present Any three-shunt configuration
W8
Present Any single-shunt configuration
Not present Any three-shunt configuration
W9
Present Any three-shunt configuration
Not present Any single-shunt configuration
W10
Present Any three-shunt configuration
Not present Any single-shunt configuration
W11
Present Gain for any FOC
Not present Gain for six-step control
W12
Present Gain for any FOC
Not present Gain for six-step control
W13
Present Gain for any FOC
Not present Gain for six-step control
W14
Present Gain for any FOC
Not present Gain for six-step control
W15
Present Voltage doubler applied (max. 145 VAC)
Not present Voltage doubler disabled