Before Beginning
Before reading further, study the drawing below to familiarize yourself
with the important components of your new inversion table.
5
ASSEMBLY
Table Bed
A-frame
Main Shaft
Ankle
Clamps
Adjustable
Foot Platform
Support Handles
Stability Feet
Ankle Lock
System
Lumbar Pillow
Traction Bars
Nylon Tether
ASSEMBLY
Step Seven
Install the Foot Platform
Assembly
• Slide the Foot Bar (IA-1119)
with one pre-assembled Foot
Piece (IA-1118) in the hole
below the ratchet (Figure 18).
• Slide the other Foot Piece
onto the Bar (Figure 18).
• Insert the screw (IA-1123)
into the Foot Piece and
tighten with the screw driver
(F5-1130) (Figure 19).
Note:
The Foot Pieces are
designed with a High and
Low setting. Position in the
Low setting (Screws facing
up) for ease of assembly.
Refer to Owner’s Manual for
a description of the settings.
Step Eight
Install the Support Handles
(FS-1040) in the A-frame
(FS-1010)
• Insert the Support Handles
into the A-frame (Figure 20).
• Insert the bolts (IA-1148)
from the inside of the A-
frame, and fasten with the
nuts on the outside of the A-
frame. Tighten with provided
wrenches (F5-1088).
Figure 20
Figure 18
Figure 19
Low Setting
12
Support Handle
Shroud
t p
S
ne
S Y S T E M
T M
t p
S
ne
S Y S T E M
T M
Crossbar
