10
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: W60B2A411B PRODUCT CODE: 48538 08/2015
Getting Started
For detailed operating instructions, read the corresponding content in this manual on
the pages listed below.
Topic
Brief instructions
Page
Installation
This appliance is designed for fully integrated installation
in your kitchen. Make sure the surface is level and there
is a water inlet, drain connection and power point nearby.
11-19
Loading the
dishwasher
Scrape off leftover food, soften burnt food residues with
water, then load plates, larger bowls and pots in the
bottom basket, cutlery in the cutlery tray and glasses,
cups and small plates or bowls in the top basket.
22-25
Checking
rinse aid
If you are using a standard detergent, make sure there is
sufficient liquid rinse aid in the dispenser.
28-29
Adding
detergent
Fill dishwasher detergent (or a detergent tablet) into the
detergent dispenser compartment.
26-27
Running the
dishwasher
• With the dishwasher plugged in and the water tap turned
to full pressure, press the
ON/OFF button to switch on.
• If you are using a “3 in 1” or similar detergent tablet,
press the
3in1 button and select the Intensive, Heavy
or Normal program.
• Press the
PROGRAM button to select a wash program
(or press the
60min button for this program).
• If you want the dishwasher to start later, press the
DELAY button to delay the start for up to 24 hours.
• Close the dishwasher door firmly to start the selected
wash program, or the countdown to a delayed start.
30, 9
20-21,
26
20-21
30
Changing a
program
Once a program has started, you can only change it at
the beginning
before the detergent has been released.
To change a program at this stage, cancel the current
program first, then select the new program and start again.
30
Adding a dish
A dish/utensil can only be added
before the detergent dis-
penser opens. Open the door a little and when the spray
arms stop working, add the dish. Close the door to restart.
30
After the wash When the buzzer indicates the program has finished,
open the door — take care as hot steam may escape.
Press the
ON/OFF button to turn off the dishwasher. Wait
at least 15 minutes to let your dishes cool down before
unloading. Turn off the power, close the tap and leave the
dishwasher door slightly ajar to let moisture evaporate.
31
Quick reference