Stirling SVD7, Инструкция по эксплуатации

Страница: 9 / 15

17 16
MODEL: SVD7 | PRODUCT CODE: 701109 | 06/2020 MODEL: SVD7 | PRODUCT CODE: 701109 | 06/2020
15
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Installation (Cont.)
Step 5: Attaching the spacers
• Place the unpacked dryer on the floor and unscrew the two screws at the back of
the dryer using a Phillips head screwdriver (Fig. 8).
NOTE: Remove the top screws if installing the dryer upside down, or the bottom
screws if wall-mounting it as is (Fig. 8).
• Insert the screws through the holes in the spacers and then fasten them into the
original screw holes.
Step 6: Hanging the dryer on the wall
• With assistance, mount the clothes dryer onto the wall brackets. To do so, lift the
dryer and align the slots at the back of the machine with the wall brackets. Then
carefully hang the dryer onto the brackets (Fig. 9).
• Make sure the hooks of the brackets are firmly inserted into the slots (Fig. 10).
Fig. 8
Attach the spacers here
if wall-mounting the
dryer upside down.
Attach the spacers here
if wall-mounting the
dryer as is.
Fig. 9
Insert the hooks into
these slots if wall-
mounting the dryer as is.
Insert the hooks into
these slots if wall-
mounting the dryer
upside down.
Fig. 10
Step 7: Electrical connection
• Once the clothes dryer is properly installed, plug the electrical cord into an
appropriately earthed three pin wall socket, switch on power at the socket and try
the machine (see page 19 for usage instructions).
16
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Getting Started
Quick start guide
The pictorial quick start guide below only contains basic information. For detailed
operating instructions, please read the corresponding content on the following pages
of the manual.
CAUTION!
Please ensure the dryer is properly and securely installed before using it.
Preparation
Plug in Load Close door
Drying
On / Off Select function Start/pause
or default
After drying
Unload Unplug and switch off power Clean filter
1 3 2
1 2 3
Getting Started Installation (Cont.)
Power