23
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-GH PRODUCT CODE: 49187 05/2015
Aluminium parts
• Clean the
burner parts
once a month to ensure nothing is clogging the
mechanism. Use a thin steel needle to remove any dirt, combustion
residues or spilled food residues from the burner holes.
• Remove the
burner bodies
(Fig. 13: C) from the cooktop and clean them
the same way as the enamelled parts, or use a nylon brush to remove any
cleaning materials, water or dirt.
• After cleaning, rinse and dry thoroughly.
• Clean the
ignition plugs
and
flame failure probes
(Fig. 14) carefully
with a nylon brush and methylated spirits to ensure proper ignition and
operation of the safety valves.
• Refit all burner parts to their dedicated spaces on the cooktop, ensuring
they are correctly in place. The hole in the ring of the burner fits over the
ignition plug (Fig. 15). If it does not fit, you are trying to fit the burner body
onto the wrong burner.
• To check that all parts are reassembled correctly, light the burners and
allow them to dry out.
Fig. 14
Other Useful Information (Cont.)
Fig. 15
Ignition plug
Flame failure probe
(thermocouple)
