19
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-GH PRODUCT CODE: 49187 05/2015
Instructions
Before first use
• When your new gas cooktop has been professionally installed, please
take the time to read this manual thoroughly to familiarise yourself with the
appliance. Pay particular attention to the safety instructions on pages 5–7.
• Check and ensure the cooktop is securely plugged into an appropriate
wall outlet and power is switched on to the outlet.
Lighting the cooktop
• The control panel at the right side of the cooktop has four control knobs,
one for each burner; the small diagram to the right of each knob illustrates
which burner it controls. (Fig. 11: A).
NOTE
You can use matches to light the burners in the event of a power failure.
• Each control knob has three positions:
Closed
(Fig. 11: B),
Maximum
aperture
(Fig. 11: C), and
Minimum
aperture
(Fig. 11: D).
• To light a burner, press down the appropriate control knob gently and
turn it anticlockwise to the
Maximum aperture
position. When the burner
lights, keep the knob depressed for approximately 10 seconds to ensure
it stays lit when released.
• Turn the knob to the required position, anywhere between the
Maximum
and
Minimum aperture
setting. Do NOT set it between Closed and Maximum.
• In the event of a burner flame being accidentally extinguished, turn off the
burner control
and wait for at least one minute before reigniting it
.
• After use, always turn the control knob to the
Closed
position.
A
D
B
Fig. 11
B
A
D
C
