10
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: SC-380 PRODUCT CODE: 36451 09/2014
Getting Started (Cont.)
Refilling the water tank
It is time to refill your steam cleaner when there is no more steam coming out of
the nozzle. Because the water tank is pressurised, use caution when opening the
unit for refilling.
CAUTION!
This appliance is under pressure.
Before removing the safety cap, press the trigger button
until all pressure has been released and no more steam
is escaping. Wear protective gloves, if necessary.
CAUTION!
When refilling the steam cleaner while it is still hot,
the first drops of water might bubble up. Always take
extreme care when opening the safety cap.
1. Disconnect the unit from the power supply and let it cool down for at least
5 minutes.
2. Press the trigger button while carefully unscrewing the safety cap
counterclockwise,
half a turn only
– do not fully unscrew the cap at this
stage!
3. Wait until all pressure has been released and the hissing noise from escaping
steam has stopped. Then push down the red valve and unscrew the safety
cap completely.
4. When the unit has cooled down, slowly refill the tank, following steps 3 – 5
on the previous page.
NOTE: Do not overfill.
Always leave some room for the water to expand.