14
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: SC-380 PRODUCT CODE: 36451 09/2014
Removing soap scum
• Soap scum dissolves almost immediately when treated with a combination of
heat and moisture.
• Rinse the surface with a small amount of water afterwards or go back over it
once more with a clean terry towelling cloth.
NOTE
: Soap scum sometimes will develop a hard surface from waterborne
minerals. If this is the case, use the small detail brush first to break up
this surface. Alternatively, spray or wipe the area first with water and
either lemon, vinegar or bicarbonate of soda to soften the minerals.
NOTE
: Moving too slowly can dry out the soap scum and cause it to
granulate, the surface will have a gritty feel. If this happens, apply
steam to the surface with the small detail brush again and clean the
area once more.
Instructions (Cont.)
