9
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: SC-380 PRODUCT CODE: 36451 09/2014
Before first use
• Unpack the appliance but keep all packaging materials until you have made
sure your new steam cleaner is undamaged and in good working order.
• Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach.
• Inspect the cord for damage or wear before each use. Do not use the
appliance if the appliance or its cord are damaged or not working properly. In
case of damage, contact our after sales support line.
Setting up the steam cleaner
Getting Started
CAUTION!
Always ensure the unit is unplugged from the electrical
outlet before filling or refilling the water tank.
1. Disconnect the unit from the power supply.
2. Unscrew the safety cap: turn it counterclockwise to remove it and open the
tank.
3. Use the measuring cup and funnel to fill the tank with fresh tap water, taking
care not to overfill the tank.
NOTE:
Fill less than 500ml (maximum tank capacity) of water into the tank so
there is enough room for the water to expand when it is heating up.
NOTE:
Only use regular water in the machine, or distilled/purified water if the
tap water in your area is very hard.
4. Close the tank by replacing the safety cap: turn it clockwise and press down
firmly to tighten.
5. If required, attach the hose to the steam cleaner. Push the hose into the
appliance and turn it clockwise (in the direction of the arrow mark) until it is
securely locked in place. (See page 11 for how to attach the concentrator
nozzle.)
6. Plug the unit into a standard
220-240V
wall socket, the power indicator will
light up.
NOTE:
Heat-up time is approximately 5 – 8 minutes. Filling the boiler with hot
water will shorten the heat-up time.
7. At the start, some water will come out of the nozzle. This is normal.
