16
After Sales Support
Telephone:
1300 886 649
Email:
Other Useful Information
Maintenance
To prolong the service life of your clothes dryer, keep it in good condition and clean
the filters regularly.
Cleaning the lint filter
The lint filter must be in place whenever drying. It must be cleaned before each use.
1. To remove the filter, insert your fingers into the four holes around the exhaust vent
shroud and pull out the filter assembly. It consists of three parts: the exhaust vent
shroud, the lint filter and the exhaust filter, as illustrated below.
CAUTION:
Before cleaning or maintenance, unplug the dryer from the wall socket.
The filter is affixed to
the back of the drum.
2. Separate the three parts (exhaust vent shroud, lint filter and exhaust filter) and,
using a soft brush or vacuum cleaner, clean any lint off the lint filter and exhaust
filter, as illustrated below. Take care not to damage the filters.
3. After cleaning, assemble the parts in the sequence of exhaust filter - lint filter -
exhaust vent shroud, aligning the recesses in the centre with the projection in the
centre of the drum. Make sure that the filter assembly is firmly inserted.
NOTE: The filter fixed on the rear of the drum should also be cleaned with a soft
brush.
