11
After Sales Support
Telephone:
1300 886 649
Email:
Step-by-step wall-mounting instructions
When mounting the clothes dryer to a plasterboard wall, make sure to attach the
wall-mounting bracket securely to a timber stud. If if the space between two studs is
too wide, fit a timber slat between the studs to mount the brackets securely onto the
studs (see Fig. 6, below).
1. Determine the dryer position on the wall and mark the required bracket position.
2. Fix the two wall-hanging brackets securely
to the timber stud (see Fig. 7, right). Align the
hanging hooks and fasten the screws tightly.
Getting Started: Installation (Cont.)
3. To install the exhaust connector, push the
connector over the exhaust vent at the
back of the dryer with the exhaust outlet
in the direction required, as illustrated in
Fig. 8, left.
4. Use the three 16mm screws to fix the
connector firmly in place.
Fig. 8
Fig. 7
Fig. 6
