10
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: BF21APF PRODUCT CODE: 703802 11/2020
Getting Started (Cont.)
Installing the filter into the fan
This bladeless purifier fan is equipped with an air-purifying H13 HEPA filter,
which captures 99.95% of fine air-polluting particles. Before using the fan you
must unwrap the filter and install it in its proper place in the fan housing.
1. Take the filter out of the protective plastic bag and discard the bag safely.
2.
To open the top cover
, push the wind outlet gently to the back – it can
be tilted up to 15 degrees to the front and back, but not more. Place your
flat hand on the top cover, push down firmly and turn the cover slightly in
anticlockwise direction (to the left) until it snaps open (Fig. 1).
3.
To attach the filter to the top cover
, place the top cover upside down on
a sturdy surface. Place the filter in the grooves, then push the filter down
firmly with both hands until you hear click into place (Fig. 2).
4.
To install the filter,
place the filter with the top cover into the housing
(Fig. 3). Turn it loosely until the curved edges almost line up, then press
down firmly and turn the cover in clockwise direction (to the right) until it
locks securely into place.
Fig. 1
Fig. 2
Fig. 3
Your new bladeless purifier fan is now ready for use.
