11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: BF21APF PRODUCT CODE: 703802 11/2020
Instructions
Location
Place the fan on a dry, flat, stable surface.
Do not place it on an inclined or soft
surface to avoid damage or malfunctions
caused by the fan tipping over.
Avoid blocking the air inlet when using the
fan. Do not place it near curtains or similar
to avoid objects blocking the air inlet,
which could impair operation of the fan
(Fig. 4).
Do not place any objects within 30cm
of the air outlet, otherwise the fan’s
performance will be impaired.
Fig. 4
away from
curtains
Fig. 5
Signal receiver
NOTE:
This fan may respond to the
remote control of other devices, and
other devices may respond to this
fan’s remote control. This is due to
the overlapping frequencies of the
remote control. It is not a quality
problem in the product itself. To avoid
misuse, keep the remote control away
from other electrical devices during
operation.
Connection
Insert the appliance plug of the AC adaptor in the DC socket at the back of
the fan body. Then plug the power plug into an appropriate electrical outlet
and switch on the power to the outlet. The fan will enter standby mode and
the LED display illuminates.
Remote control preparation
The remote control for the bladeless purifier fan is powered by a CR2025 coin
cell (contained inside the remote control). Before use, make sure you have
removed the plastic insulation film from the back side of the remote control.
When using the remote control, point it at the signal receiver at the front of the fan
to maximise the remote control signal (Fig. 5).
