Still FXD 20 N Скачать руководство пользователя

Страница: 73 / 142

Use

Operating the FleetManager™ option

Disconnecting a truck equipped with

the FleetManager™ option

NOTE

Operators must not log off intentionally while

driving.

WARNING

Access to the truck must be disabled.
Unauthorised users are not allowed to use the truck.

Disconnecting a truck equipped with a

keypad or electronic key

– Park the truck in a safe place.
– Press the button (3) to log off. Keep the

button pressed in.

No LEDs light up. A long acoustic signal

sounds.
The LED (1) lights up for a second (red colour).

The LED (2) is not lit. A long acoustic signal

sounds.
The LED (1) is no longer lit. The LED (2)

ﬂashes slowly at two-second intervals (green

colour). No acoustic signal sounds.
The truck is disabled.
– Turn the switch key to the off position to

switch the truck off completely.

11648011651 EN - 09/2019

Содержание FXD 20 N















































































































































Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды

Still FXD 20 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды