Still FXD 20 N Скачать руководство пользователя страница 63

Страница: 63 / 142

Use

Driving

Drive program

The indicator light (1) is on during operation

of the truck. The shape of the indicator light

indicates the selected program.
The truck is equipped with three different drive

programs:
• Hare mode (3)
• BlueQ mode (4)
• Tortoise mode (2)

NOTE

When the operator restarts the truck, the last

mode selected is automatically activated.

NOTE

The drive program is instantly changed. If

the operator changes mode while driving the

truck, he must remain vigilant.

Hare mode

When Hare mode is selected on the screen,

the truck operates at its maximum perfor-

mance.

Blue Q mode

Selecting Blue Q mode allows you to slightly

reduce the performance of the truck:
• The travel speed of the truck is reduced

(70% of maximum speed)

• The speed of lifting and lowering the forks is

reduced (90% of maximum speed)

This mode allows you to save battery.

Tortoise mode

Selecting Tortoise mode allows you to reduce

the performance of the truck:
• The travel speed of the truck is reduced to

6 km/h

• The speed of lifting and lowering the forks is

considerably reduced

11648011651 EN - 09/2019

Содержание FXD 20 N















































































































































Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды

Still FXD 20 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды