Still FXD 20 N Скачать руководство пользователя

Страница: 103 / 142

Use

Handling the truck in speciﬁc situations

Slinging the truck

DANGER

Danger of truck falling
Only use slings and a hoist of sufﬁcient quality.

Check the weight of the machine (including battery)

in order to choose a suitable device. Refer to the

technical features.

Observe the following instructions:
– Shut off the truck and disconnect the battery

connector.

– Remove any items that could fall.
– Protect all parts that come into contact with

the lifting device.

– Attach the lifting device to the sling ring (1).

NOTE

Do not sling the truck by the control module or

the steering wheel.

– Carefully lift the truck.

DANGER

Risk of falling
Make sure no one is under or near the truck when

slinging the truck.

11648011651 EN - 09/2019

Содержание FXD 20 N















































































































































Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды

Still FXD 20 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FXD 20 N

Отзывы:

Похожие инструкции для FXD 20 N

Бренды по названию

Популярные бренды