Still EXU-H-18, Оригинальное руководство пользователя

Страница: 69 / 142

●
Reverse travel is used for setting down the
load Adjust your speed.
●
Do not drive with an unstable load
●
Raise the forks slightly in order to pass ob-
stacles
●
Be careful of low passageways, low door-
ways, scaffolding, pipes etc.
●
Check that the width of the load is not
greater than the width of the aisle
Setting a load down on the ground
–
Carefully move the truck to the desired
area.
–
Carefully move the load into the unloading
area.
–
Lower the load until the load arms are free.
–
Withdraw the truck in a straight line.
–
Raise the load arms again several centime-
tres.
CAUTION
Risk of falling
Be careful to keep clear of other loads at the side of
or behind the truck.
Before leaving the truck
NOTE
Always stop the truck on level ground away
from traffic routes.
–
Ensure the load arms are in the lower posi-
tion.
–
Switch off the ignition, then remove the key
or press
#
on the electronic key for 3 sec-
onds.
–
In the event of a prolonged standstill, pull
on the emergency stop handle.
Use
4
Transporting loads
59 1152 801 15 17 EN - 02/2021 - 14