Still EXU-H-18, Оригинальное руководство пользователя

Страница: 53 / 142

Driving
–
Turn the ignition key to the
Tortoise
po-
sition (slow acceleration and deceleration)
or the
Hare
position (faster acceleration
and deceleration).
–
Lower the tiller in (2) zone.
NOTE
The truck is in the drive position in the (2) po-
sition. In the lower (1) or upper (3) the brake is
applied and the traction motor is switched off.
NOTE
Always operate the travel throttle slowly, as
the truck reacts immediately. Abrupt starts or
braking or reversal of direction of travel must
be avoided at all costs.
Forward travel
–
Press with your thumb on the lower part of
the throttle.
–
The speed increases with the movement of
the throttle; speed is limited to 4 or 6 km/h
depending on the position of the key.
–
When the control throttle is released, the
truck brakes electrically.
Reverse travel
–
Press with your thumb on the upper part of
the throttle.
–
The speed increases with the movement of
the throttle; speed is limited to 4 or 6 km/h
depending on the position of the key.
–
When the control throttle is released, the
truck brakes electrically.
Reversing the direction of travel
–
Release the throttle.
–
Operate it progressively in the opposite di-
rection until the required speed is reached.

Use
4
Driving
43 1152 801 15 17 EN - 02/2021 - 14